NOTE: UEFI system configuration options vary by platform and the specific components that are installed in your system. Therefore, you might not see some of the options that are documented here. For more information about each option, see the UEFI System Utilities User Guide for HPE ProLiant Gen9 Servers .
Thermal Configuration
Use this option to select the fan cooling method for the system. Modifying this option is only advised for configurations that differ from typical Hewlett Packard Enterprise-supported configurations that cannot be cooled adequately via Optimal Cooling.
Setting the thermal configuration
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Fan and Thermal Options > Thermal Configuration and press Enter.
2. Select a setting and press Enter.
a. Optimal Cooling - Provides the most efficient solution by configuring fan speeds to the minimum required to provide adequate cooling.
b. Increased Cooling - Operates fans at a higher speed.
c. Maximum Cooling - Provides the maximum cooling available for the system.
